The MEQ Compact Bracket comes with the mounting hardware for the option you choose. Find yours below.
Mag Feet (quick, non-permanent)
Includes 4 × heavy-duty magnetic feet (28kg of pull force per magnet) and 4 × M8 nyloc nuts.
- Bolt the magnetic feet to the bracket with the nyloc nuts supplied.
- Clean the roof, then lower the bracket straight down onto a steel surface. Not steel? See roof compatibility.
Channel Nut (platform racks)
Includes 2 × M8 channel nuts, 2 × M8 × 20mm stainless bolts, and 2 × M8 washers and spring washers. Slide the channel nuts into your platform's channel, line up the bracket and bolt down.
Rhino-Rack Pioneer 6 (Zwifloc)
Includes 2 × Zwifloc fasteners, 2 × 20mm M6 stainless bolts, and 2 × M6 washers and spring washers. Fit the Zwifloc fasteners into the platform slots, then bolt the bracket down.
ARB Base Rack
Includes 1 × bridge bracket, 2 × M8 stainless bolts, and 2 × M8 washers and spring washers. Fit the bridge bracket to the Base Rack, then bolt the Compact Bracket to it.
Reddot covers (prime movers)
Includes 4 × M8 stainless bolts, 4 × M8 flange nyloc nuts and 2 × laser-cut, powder-coated washers. Bolt the bracket through the Reddot cover using the washers to spread the load.
Ute headboard mounts
For utes with a tray headboard. The Standard Headboard Mount suits 2.5" and 3" headboards and fits with 2 × heavy-duty T-bolt clamps. The Premium Headboard Mount suits 3" headboards and sits lower for a sleek, integrated fit. It takes a little longer to install.
Power
The Compact Bracket with step up has the voltage step up built in. Plug an Anderson lead into the side of the bracket and you're powered. For the standard Compact Bracket, use one of our 12V Plug & Play adaptors.